Lutron Skylark LED+ Dimmer Switch for Dimmable LED, Halogen and Incandescent Bulbs | 150W/Single-Pole or 3-Way | SCL-153P-WH | White

My Personal Favorite
Work well, have a minimum setting and are compatible with LED lighting. I got the first one at a local brick and mortar, the rest so they match, mixed local and on-line.Nothing fancy, no remote, not gobs of power, (but 150W of LED lighting is quite a bit), just a good, reliable dimmer that’s easy to use. They work in a single or three-way, configuration as well. They’re My Personal Favorite.

Works very well
Works well with Bioluz bulbs Bioluz LED Vintage Edison LED Bulb, Dimmable 7W ST64 Antique LED Bulb Squirrel Cage Filament Lights, Home Decoration, E26 Base, 3000K Soft White, Pack of 6. On the lower dim levels, there is very slight, occasional flickering, but nothing like a strobe effect, so it is acceptable. Probably more an issue with the bulb than this switch.I already have the Lutron Maestro dimmer for another location Lutron Maestro C.L Dimmer Switch for Dimmable LED, Halogen & Incandescent Bulbs, Single-Pole or Multi-Location, MACL-153M-WH, White. The advantage of this Skylark over the Maestro is that dimming is much faster to span the high/low range, because you have to hold the switch for a few seconds to dim/brighten on the Maestro, vs. a split second to get it where you want here. Also, you have a full range to work with here, in contrast to just six or so grades of dimming.Installation was very easy in a single pole application. Be sure to trim your existing wires if they are exposed long enough to have wrapped around a screw on a traditional switch, since you are going to use a supplied wire nut to connect the wires coming from the back of this to your existing wall wiring, so you don’t inadvertently short the circuit when you shove the wires back into the wall.Hopefully, the dimmer lever holds up and doesn’t get snapped off. Also, I should point out that you have a relatively small on/off button with this switch, which is not exactly a positive.

Works as it should
Works great!Color and price were perfectCompatible with my lights and I have had no issues.

Great dimmer for LED bulbs
This dimmer works great with dimmable LEDs. I installed it in our dining room for use with some LE® 9.5W Dimmable E26 LED Bulbs (http://www.amazon.com/gp/product/B00QLJHFMA?redirect=true&ref_=cm_cr_ryp_prd_ttl_sol_134) and it works better than I had anticipated. I have heard from many others that LEDs will not dim as low as incandescent bulbs, but with this combination the bulbs will dim all the way down to just a slight spark of light. The dimmer has a range adjustment switch on the side so that you can adjust how low the lights will dim with the slide all the way down, which is nice so you can set it so that the bulbs put out the minimum required light when the slider is all the way down, and they won’t go completely off without actually turning off the flip switch below the slider. Installation was easy, the instructions included are clearly written and anyone that has ever done even the least little bit of light switch installing will be able to install this. Make sure to check what type of switch box you have currently installed, because if yours are like mine, they are the all-in-one switches meaning that the electrical box is part of the switch, so when you replace them with ones like this one, you will need an Old Work Electrical Box (http://www.amazon.com/Lamson-Home-Products-B114R-UPC-Work/dp/B000GATNU2/ref=pd_sim_60_71?ie=UTF8&refRID=1MVJ1BQQX2D8FGV9JPHQ) in whatever size you have (Single, Double, Triple, etc Gang). Also, since this is a dimmer, it has a box on the back of the switch that sticks out quite a bit. You can make it work with a regular depth box, but a over sized depth box (http://www.amazon.com/Carlon-BH234R-Outlet-8-Inch-Length/dp/B0007N738M/ref=pd_sim_328_9?ie=UTF8&refRID=18XDRESVRRPRN9F2V32W) is recommended, especially if you have multiple runs coming in and out of the box. If you have the shallow boxes though, you will not be able to install this without changing the box. Overall I am very pleased with this dimmer, as well is my wife, and we all know that if the wife is happy everyone is happy.

It was easy to install and works as it should!

I replaced an old rotary dimmer with this Lutron dimmer. I find that this Lutron dimmer is kind of bulky for the electrical box with all the wire nuts, but the dimmer works great with LED light bulbs, even though I have a very old light fixture. It’s a very well-designed dimmer, and I really like the little rocker switch. However, I wish it had screws instead of wires because wire nuts take too much space in the box.